Setting The Media Mismatch Behavior - Xerox Phaser 6115MFP User Manual

Setting the Media Mismatch Behavior

If you select a media type in the printer driver that is different than the paper source set on the
products control panel, you can choose whether or not the product continues to print job.
Using the Control Panel
1.
From the main screen, press the Menu/Select button to enter the
2.
Scroll to the Auto Continue
then press the Menu/Select button.
3. Select from the following options by using the Right Arrow or Left Arrow buttons.
: The product continues printing when a media size error occurs.
■ ON
■ : The product stops printing when a media size error occurs.
OFF
4.
Press the Menu/Select button to save the settings.
Using the MFP ControlCentre
1. Open the MCC, connect to your product and download the current .dat file.
2.
Click the Menu button.
3.
Select the Machine Setup tab.
4.
Check Auto Continue, and then click OK.
5.
Click the Upload button to save the new settings to the product.
Note: Cannot be set from CentreWare IS.
menu, or press number 10 on the alphanumeric keypad, and
Phaser® 6115MFP Multifunction Product
3-12
Configuring the Product
Machine Setup menu.