Scan Start/Stop - Icom IC-475H Instruction Manual

© — -10 0
ав
20 СМ DELAY CONTROL [DELAY] (р. 24)
@) AF TONE CONTROL [AF TONE]
0) МІС GAIN CONTROL ыйын GAIN]
cit] 0005
1-7 m
2 FC) Ов
"О- ао
—®©
(Кг naooooenN а
03 5РЕЕСН SWITCH [SPCH] (р. 43)
© IL JL fees
2 Је
Ex
isses ü [no o o oh,
=
=
(5-7 00000008 N
24) SCAN START/STOP SWITCH [SCAN]
(p. 36)
Я---21
GERE =
СО000000
@)SELECTED MODE MEMORY SCAN
SWITCH [MODE-S] (p. 37)
In SSB, CW modes:
This control varies the gain of the RF stage when the transceiver is in
receive mode. Rotate clockwise for maximum gain.
In FM mode:
The contro! makes the variable attenuator function continuously
from 0 to 20dB when the transceiver is in receive mode.
This control changes the transmit to receive switching time during
CW semi break-in operation. Adjustment depends on the keying
speed used. Clockwise rotation increases the delay time.
Adjust this control for a suitable modulation level while speaking
into the microphone
using your normal
voice level.
Rotate the
control clockwise to increase the gain.
This switch starts and stops all the 1С-475Н scan functions.