Advertisement
4) MEMORY CLEAR SWITCH [M-CL]
(p. 35)
49 MEMORY
CHANNEL
SELECTOR
CONTROL
[MEMO] (p. 33)
со
11-01
3-2)
© as
Юс
===)
=
0000000,
и
mono
©
сосоо
00000000
LJ
49 METER
[9]
(sooo
agooooonp
©
=
=
E
=
р
|
© осоос:>
OL:
2
О
LJ
3-2
FREQUENCY
DISPLAY
бї FREQUENCY
READOUT
This switch clears unwanted
information
in any memory
channel.
When
pushed,
information
in the displayed
memory
channel
is
cleared and the memory channel reverts to blank status.
This control is used for selecting memory channels.
Refer to SECTION
3 - 2 FREQUENCY
DISPLAY for more infor-
mation.
The meter functions as an S-meter or Center meter during receiving,
and as an RF-meter or ALC-meter
during transmitting.
Refer to
item (12 METER SWITCH.
This indicator lights up when the transceiver is in the transmit mode.
The indicator lights up when the transceiver is in the receive mode
and the squelch opens.
This readout shows the operating frequency using a 7-digit display
with 100Hz resolution.
"ТОМЕ-5" appears when the transceiver is activated using the Tone
Squelch function with an optional UT-34 ТОМЕ SQUELCH
UNIT.
"ТОМЕ"
appears
when
the transceiver
is acticated using the sub-
audible
tone
function
(U.S.A.,
Australia
versions)
or tone
call
function (Europe, Sweden versions).
Advertisement
Need help?
Do you have a question about the IC-475H and is the answer not in the manual?