Cuisinart DLC-10C - Classic Original Food Processor Use And Care Manual page 5

6
Hold pusher with white Slide Lock
toward you. Slide pusher over feed
tube on cover and push locking tab
down until locking tab clicks.
CAUTION: Machine must be unplugged
wnen you practice locking and unlocking
pusher. Repeated locking and unlocking
with machine plugged in is never neces
sary in normal use and will make
machine inoperable.
6
Apply even pressure to large
pusher while holding lever down
at PULSE position, and push food
through.
Locking
Tab
Plug in machine. Move control
switch up to ON position to start
motor. Move control switch down to
OFF position to stop motor. Move
control switch down to PULSE
position and release it for
pulse/chopping. If machine doesn't
start, make sure it is plugged in and
work bowl, cover and pusher
assembly are locked in position.
To remove pusher assembly, hold
it with thumb on large tab. Press
firmly on tab and lilt straight up.
Cover will stay in place, allowing
you to reload feed tube.
8
To remove cover, hold pusher
assembly with thumb away from
two locking tabs. Turn and lift.
The work bowl won't come off
until the cover is unlocked.
8
To remove disc from stem, slide
button up as far as it will go and
turn stem counterclockwise.