CHOPPING AND PUREEING
WITH THE METAL BLADE
SLICING AND SHREDDING
WITH THE SLICING AND
SHREDDING DISCS
1
Put base on counter, with nameplate
facing you.
Pick up work bowl, with handle
facing you, and place it on base
with handle at about 7 o'clock.
1
Lock bowl in place. (See 1 and 2
above.)
Turn work bowl counterclockwise
until it clicks.
Place disc, cutting side down, on
flat, stable surface and hold it down
firmly with one hand. With other
hand, line up two symbols
(oand a) on stem with similar
symbols on disc. Turn stem clock
wise until it clicks into position.