Teldat Regesta Smart v2 Nessum Installation Manual page 33

4 Connecting the Router
The Regesta Smart v2 Nessum features independent modules for the Wireless WAN interface, allowing you to
choose modules from different manufacturers or multiple modules from the same provider, depending on the techno-
logy used. Typically, firmware is separate from the software. To ensure the correct update, consult your distributor for
the appropriate UPGRADE file specific to your Wireless WAN module, as detailed in the "Teldat Dm781-I Cellular In-
terface" manual, which offers instructions for module upgrades.
The Regesta Smart v2 Nessum includes a dedicated Nessum chipset that requires its own firmware, separate from
other device software. If a Nessum firmware upgrade is needed, contact your distributor for the appropriate UP-
GRADE file. The "Teldat Dm1092-I Nessum Interface " manual also provides detailed instructions on how to perform
the firmware upgrade.
4.7.1 Establishing a Connection to the Router
There are two methods available for accessing the device's Command Line Interface (CLI):
4.7.1.1 Connecting Via the Local Console (CONF Connector)
The Regesta Smart v2 Nessum features a convenient RJ45 female connector labeled CONF on its front panel,
providing access to the device's local console. To use this, connect the CONF port to an asynchronous terminal or a
PC with terminal emulation software.
To connect to the configuration port, use the provided RJ45 cable and the female RJ45-to-female DB9 adapter in-
cluded with the router. If your terminal uses DB25 connectors, an additional adapter will be required.
Connecting for Configuration
Fig. 24:
4.7.1.2 Connecting via an IP Terminal (LAN1 Connector)
When connecting through an IP terminal, the Regesta Smart v2 Nessum will automatically use its default configura-
tion if no prior setup has been done.
The default settings are:
28
• Via the CONF connector.
• Using the Telnet protocol.
• Speed: 115200 bps
• Data bits: 8
• Stop bits: 1.
• Parity bits: None.
• No flow control.
• IP address: 192.168.1.1
• Subnet mask: 255.255.255.0
Teldat S.A.
Regesta Smart v2 Nessum