Initializing The System - Compaq DS10L - AlphaServer - 256 MB RAM Reference Manual

2.16 Initializing the System

The initialize command resets the system and executes power-
up tests.
Syntax: initialize
After self-tests are executed, the system autoboots unless:
A halt assertion condition exists (see Section 1.10) –or–
The auto_action environment variable is set to halt (see Section 2.18.1).
If the auto_action environment variable is set to boot or restart and no halt
assertion condition exists, the system autoboots. In all other cases, the system
stops in console mode and does not attempt to boot.
Example 2–23 Initialize Command
>>> init
Initializing...
256 Meg of system memory
probing hose 0, PCI
probing PCI-to-ISA bridge, bus 1
probing PCI-to-PCI bridge, bus 2
bus 0, slot 9 -- ewa -- DE500-BA Network Controller
bus 0, slot 11 -- ewb -- DE500-BA Network Controller
bus 0, slot 13 -- dqa -- Acer Labs M1543C IDE
bus 0, slot 13 -- dqb -- Acer Labs M1543C IDE
bus 0, slot 14 -- vga -- DEC PowerStorm
bus 2, slot 0 -- pka -- NCR 53C875
bus 2, slot 1 -- pkb -- NCR 53C875
bus 2, slot 2 -- ewc -- DE500-AA Network Controller
bus 0, slot 16 -- pkc -- QLogic ISP1020
bus 0, slot 17 -- dra -- Mylex DAC960
Testing the System
Testing the Disks (read only)
Testing the Network
System Temperature is 34 degrees C
CPU 0 Alpha 21264-4 466 MHz
TIG Rev 2.1
Arbiter Rev 3.30 (0x7E)
Array # Size
------- ----------
0 512 MB
1 512 MB
2 128 MB
3 256 MB
Total Bad Pages = 0
Total Good Memory = 1408 MBytes
AlphaServer DS10 466 MHz Console V5.7-2 Jan 13 2000 14:24:16
>>>
2-38 DS10 / DS10L Console Reference
SROM Revision: V1.8.208
Base Addr
---------
000000000
020000000
050000000
040000000