Compaq DS10L - AlphaServer - 256 MB RAM Reference Manual page 99

2.18.7 ew*0_mode
Sets an Ethernet controller to run an AUI, ThinWire, or twisted-
pair Ethernet network. The default is auto-sense. For the fast
setting, the device defaults to fast.
Syntax: set ew*0_mode value
where value can be:
aui
Device type is AUI.
auto-sense
Device type is sensed by the console.
twisted-pair
Device type is 10BaseT (twisted pair).
fast duplex,
Device type is duplex 10BaseT.
twisted-pair
fast
Device type is fast SCSI.
fast FD
Device type is fast full duplex SCSI.
BNC
Device type is BNC.
auto-negotiate
DE500-BA
2.18.8 ew*0_protocols
Enables network protocols for booting and other functions.
Syntax: set ew*0_protocols protocol_value
where protocol_value can be:
mop (default)
Sets the network protocol to mop (Maintenance Operations
Protocol), the setting typically used with the OpenVMS
operating system.
bootp
Sets the network protocol to bootp, the setting typically
used with the Tru64 UNIX operating system.
bootp,mop
When both are listed, the system attempts to use the mop
protocol first, regardless of which is listed first. If not
successful, it then attempts the bootp protocol.
SRM and AlphaBIOS Consoles 2-47