Compaq DS10L - AlphaServer - 256 MB RAM Reference Manual page 111

3. In the Run Maintenance Program dialog box, type the name of the program
to be run in the Program Name field. Then tab to the Location list box, and
select the hard disk partition, diskette, or CD-ROM drive from which to run
the program.
4. Press Enter to execute the program.
NOTE: If you are running a utility from a diskette, you can simply type the
utility's name into the Program Name field, and press Enter. The
diskette drive is the default selection in the Location field. Use
Alt+Down arrow when a list box is selected to open the list.
To return to the SRM console, power the system off and then on again. The
changes you made will take effect, and the SRM will appear.
SRM and AlphaBIOS Consoles 2-59