Figure 3–9 Halt/Reset Button - DS10L
1
PK2220
The Halt/Reset button suspends the operating system and returns control to the
SRM or RMC console under either the OpenVMS or Tru64 UNIX operating
systems.
The Halt button, however, does not override the halt {in, out} commands. If you
halt the system with halt in, you must use halt out to deassert the halt state.
When you issue either the halt in or halt out command under OpenVMS or
Tru64 UNIX, the terminal exits the RMC and reconnects to the system's COM1
port.
RMC> halt in
Returning to COM port
RMC> halt out
Returning to COM port
Remote Management Console 3-15