1. Remove power from the system.
2. Unscrew the two captive screws
3. Unscrew the six quarter-turn screws
4. Raise the cover up and secure it in the 60° or 90° position using a notch on
the cover hold-open bracket
NOTE: The 60° position on the DS10L cover hold-open bracket allows access to
the cabinet interior with the rear cables attached. The 90° position
requires removal of all cables attached to the rear of the system.
A-8
DS10 / DS10L Console Reference
on the top of the cover.
on the top of the cover.
located on the right hand side.