Dell PowerEdge T610 Hardware Owner's Manual page 97

Figure 3-11. Installing the Internal SD Module
1
1 release tab
3 latch
5 SD card slot (SD connector)
7 hooks (2)
6 Connect the internal SD module cable between the connector on the
module and the J_SDCARD connector on the system board. See
Figure 6-1 for the location of the connector on the system board.
7 Install the cooling shroud. See "Installing the Cooling Shroud."
2
3
2 internal SD module cable connector
4 SD flash card
6 internal SD module
Installing System Components
4
5
6
7
97