Cooling Shroud
Removing the Cooling Shroud
WARNING:
time after the system has been powered down. Allow the memory modules and
heat sinks to cool before handling them.
CAUTION:
Overheating of the system can develop quickly resulting in a shutdown of the
system and the loss of data.
1 Turn off the system and attached peripherals, and disconnect the system
from the electrical outlet and peripherals.
2 Open the system. See "Opening the System."
3 Remove the expansion card stabilizer. See "Removing the Expansion Card
Stabilizer."
4 Pull and hold the cooling shroud release latch in the direction of the arrow,
and lift the shroud up and out of the chassis by the touch points. See
Figure 3-9.
92
Installing System Components
The memory modules and heat sinks are hot to the touch for some
Never operate your system with the cooling shroud removed.