Pci Irq Assignments Screen; Serial Communication Screen - Dell PowerEdge T610 Hardware Owner's Manual

Option
OS Watchdog Timer
(Disabled default)
I/OAT DMA Engine
(Disabled default)
Embedded Video
Controller
(Enabled default)

PCI IRQ Assignments Screen

Option
<PCIe device>

Serial Communication Screen

Option
Serial Communication
(On without Console
Redirection default)
Description
Sets a timer to monitor the operating system for activity,
and aids in recovery if the system stops responding.
When Enabled, the operating system is allowed to
initialize the timer. When Disabled, the timer is not
initialized.
NOTE:
This feature is usable only with operating systems
that support WDAT implementations of the Advanced
Configuration and Power Interface (ACPI) 3.0b
specification.
Enables or disables the I/O Acceleration Technology
feature (when available).
Enables or disables BIOS support for the integrated video
controller.
NOTE:
This field can be disabled only if an add-in video
card is present. If this field is disabled, remote access
features such as virtual KVM are not available.
Description
Use the <+> and <-> keys to manually select an IRQ
for a given device, or select Default to allow the BIOS to
select an IRQ value at system startup.
Description
Selects whether the serial communication devices
(Serial Device 1 and Serial Device 2) are enabled in
BIOS. BIOS console redirection can also be enabled and
the port address used can be specified.
Options are On without Console Redirection, On with
Console Redirection via COM1, On with Console
Redirection via COM2, and Off.
Using the System Setup Program and UEFI Boot Manager
65