Installing The Expansion Card Stabilizer - Dell PowerEdge T610 Hardware Owner's Manual

Figure 3-8. Removing and Installing the Expansion Card Stabilizer
1 release tab
3 chassis slots

Installing the Expansion Card Stabilizer

1 Slide the edge of the expansion card stabilizer into the slots in the
chassis until the release tab locks into place. See Figure 3-8.
2 Close the system. See "Closing the System."
3 Place the system upright and on its feet on a flat, stable surface.
4 Reattach any peripherals, then connect the system to the electrical outlet.
5 Turn on the system and attached peripherals.
1
2
Installing System Components
3
expansion card stabilizer
2
91