FP PostBase Fusion Installation And Safety page 27

Graphical symbols, safety signs and product safety
labels on the PostBase Fusion
Graphical symbols, safety signs and product safety labels are affixed to the
PostBase Fusion . You will find the product safety labels on the type plates of the indi-
vidual components.
The following overview lists and explains them.
Warning: Automatic machine operation.
Indicates an automatic machine operation that may result in the user
being startled.
GS Mark. 'Geprüfte Sicherheit' (Tested safety) according to the
requirements of the German Product Safety Act (ProdSG).
Tested by the accredited laboratory NEMKO.
CE label.
With this label, the manufacturer declares that the product meets the
requirements of all relevant EU directives that require such labelling.
The manufacturer's EU declaration of conformity for the PostBase Fusion
is printed on page 33.
UKCA marking (UK Conformity Assessed).
With this marking, the manufacturer declares the conformity of the
product with the corresponding regulations of the United Kingdom.
The UKCA marking is comparable to the CE label applicable to the
European Economic Area.
Nemko certification mark.
The approval mark indicates that the product complies with the applicable
standards as required in the USA and Canada.
Nemko-CCL is a NRTL (nationally registered testing lab), which is entitled
to perform this test. Product tested in accordance with IEC 62368-1.
Graphical symbols, safety signs and product safety labels ...
27