FP PostBase Fusion Installation And Safety page 31

Ink cartridge
Ink cartridge
Operating and
storage conditions
Material Safety Data Sheet (MSDS) for users available at
sdb.francotyp.com/en.
Mail piece specifications
Format
(height × width)
Thickness
Material
Labels
Subject to short-term modification.
FP ink cartridge for PostBase Fusion
+15 °C to +35 °C (59 °F to 95 °F)
Use in closed rooms only
Do not expose to direct sunlight
Relative humidity 20% to 70%, non-condensing
PostBase Fusion (franking machine with hand feed tray):
89 mm × 127 mm up to 253 mm × 353 mm
(3.5" × 5" up to 10" × 14")
PostBase Fusion with feeder:
100 mm × 148 mm up to 253 mm × 353 mm
(4" × 6" up to 10" × 14")
Franking without usage of the sealing function:
Up to 10 mm (0.4")
Using the sealing function (PostBase Fusion Feeder):
Up to 7 mm (0.3")
Ink-absorbent material (suitable for ink-jet printing)
No dark paper
No glossy coating on the surface to print
No bubble-foil material
No corrugated board
No extremely fibrous paper on which the data matrix could
smear
Self-adhesive labels for PostBase Fusion
31
Technical Data