FP PostBase Fusion Installation And Safety page 17

Installation and commissioning
R-PIN
• Enter the R-PIN (Repository-PIN).
• Confirm with C
ONTINUE
installation.
Synchronisation ...
PostBase Fusion now loads software and
data and then restarts.
• Follow the information and instructions on
the display.
Inserting the ink cartridge
• Tap C to insert the ink cartridges.
ONTINUE
Note: Do not touch the cover flap of the print
system or otherwise obstruct the automatic
opening.
PostBase Fusion moves the print system to
the change position and then opens the
cover flap. The flashing green LED indicates
that no cartridge has been inserted yet.
The screen sequence in the display shows
the sequence of the cartridge change.
The insertion of the cartridges is described in
detail below.
and resume the
17