Programming The Check Tracking; Programming The Clerk Interrupt - Casio QT-6600 Programming Manual

Program 3

4-1-5-15 Programming the check tracking

Operation: <PGM3> → 1.Machine Feature → 5.General Feature → 15.CHK Tracking

4-1-5-16 Programming the clerk interrupt

Operation: <PGM3> → 1.Machine Feature → 5.General Feature → 16.Clerk Interrupt
P-46
——— CHK (check) number / TBL (table) number
——— Print "Invoice No." on receipts / or Not print
——— Print "Invoice No." while clerk interrupt / or Not print
——— Print "Invoice No." while check tracking / or Not print
——— Keytops in check No. pop-up window: ST / Clerk / Time
last order / Time open
——— Transfer table by swiping a card.
——— Automatic check No. issuance in separate mode
——— Ignore leading zeros of check No.
——— Compulsory check No. for order item
——— Compulsory guest receipt for order item
——— Zero balance is treated as cash sale.
——— Clerk sign off timer: 0 ~ 99. (Sec.) This program is also
effective for non-clerk interrupt system.
——— Affect current clerk data whenever it changes.
——— Broadcast clerk information whenever it changes.
——— Default sheet number when clerk pop-up window is opened.
——— Issue order at the end of the transaction while using clerk
interrupt.