Registrations; Clerk Sign On / Off Operation - Casio QT-6600 Reference Manual

Registration
4.

Registrations

4-1.

Clerk sign on / off operation

1) Clerk sign on operation (Clerk key has the clerk number setting.)
REG C01 10-10-01 12:34
REG
C01
2) Clerk sign on operation (Clerk key has no clerk number setting.)
REG 10-10-01 12:34
CLK#
Please sign on.
R-134
This section describes characteristic registrations of the QT-6600.
Key catch tone, error tone volume can be controlled by the <LEFT/RIGHT ARROW> key.
The following examples illustrate the clerk sign on / off operation.
• When an i-Button key is used, sign on operation can be performed by attaching the clerk
key to the receiver by the appropriate i-Button key.
Note: After initialization, i-Button key ID should be set.
• When a clerk ID number is programmed for the clerk key, sign on operation can be
performed by merely pressing the clerk key on the keyboard or in the clerk pop-up
window.
It is the same procedure that even clerks are assigned as "clerk", "cashier" or "manager."
000001
Mode
In case of the store has many clerks to control, you need not allocate all clerk keys on the
keyboard but allocate a few clerk key and program no clerk number one of the clerk key.
000001
----
Clerk window 1
C01
C03
C05
C07
C09
NEXT PREV
1. Just press the appropriate <CLERK> key in the keyboard or
in the clerk pop-up window.
1. Press the <CLERK> key, if you want to display no clerk
number entries.
C02
C04
C06
C08
C10
(clerk pop-up window)