Clerk Number; Operation Monitor - Casio QT-6600 Reference Manual

(RS-232C printer)
RS-232C Printer
/1
/2
(LAN printer)
LAN Printer
L1
L2

3-3-24. Clerk number

MGR C01 10-10-01 12:34
001111 C01
002222 C02
003333 C03
004444 C04
Hard key code
C 04

3-3-25. Operation monitor

MGR C01 10-10-01 12:34
Start...
QT-6600 Reference Manual
normal end
Normal End
error end (error code)
Error End xxxx
0.00
5. Execute this command at the terminal which is connected
normal end
Normal End
error end (error code)
Error End xxxx
0.00
5. Execute this command at a terminal in the cluster.
You can program clerk number directly to the <CLK#> key in the MGR mode.
000000
097
098
099
100
0
You can monitor a clerk's operation by monitoring display and receipt (in case of
connecting printer).
000000
Note: Do not designate the monitored or monitoring terminal.
0.00
with RS-232C printer(s).
1. Sign on a clerk (if necessary).
2. Press <Manager> to assign manager mode.
3. Enter "00" and the clerk number you want to set and press the
appropriate <CLK#> key.
(Entering "000000" clears the clerk number program.)
4. To terminate this step, press the <ST> key.
1. Sign on a clerk (if necessary).
2. Press <Manager> to assign manager mode.
3. Enter "99990000nn (nn: terminal ID No. to monitor)" and
press the <ST> to start operation monitor.
The display shows the screen of the monitored terminal.
The receipt shows the printout of the monitored terminal.
4. Press <ESC> twice break the monitoring.
R-109