Sata Configuration Screen - Dell PowerEdge HR675 Hardware Owner's Manual

Table 2-4. CPU Information Screen (continued)
Option
Demand-Based Power
Management
(Enabled default)
Processor X ID

SATA Configuration Screen

Table 2-5 lists the options and descriptions for the information fields that
appear on the SATA Configuration screen.
Table 2-5. SATA Configuration Screen
Option
Port A
(Auto default)
Port B
(Off default)
Port C
(Off default)
Port D
(Off default)
Port E
(Off default)
Description
NOTE:
Check your operating system documentation to
verify if the operating system supports this feature.
Enables or disables demand-based power management.
When enabled, the CPU Performance State tables will
be reported to the operating system; when disabled, the
CPU Performance State tables will not be reported to
the operating system. If any of the CPUs do not support
demand-based power management, the field will
become read-only, and automatically set to Disabled.
family, model, and stepping of the
Displays the
specified processor.
Description
Displays the model number, drive type, and size of the
device attached to Port A. When set to Auto (default), the
port is enabled if devices are attached to the port.
Displays the model number, drive type, and size of the
device attached to Port B. When set to Auto, the port is
enabled if devices are attached to the port.
Displays the model number, drive type, and size of the
device attached to Port C. When set to Auto, the port is
enabled if devices are attached to the port.
Displays the model number, drive type, and size of the
device attached to Port D. When set to Auto, the port is
enabled if devices are attached to the port.
Displays the model number, drive type, and size of the
device attached to Port E. When set to Auto, the port is
enabled if devices are attached to the port.
Using the System Setup Program
47