Troubleshooting A Diskette Drive - Dell PowerEdge HR675 Hardware Owner's Manual

8 Reconnect the system to the electrical outlet, and turn on the system and
attached peripherals.
If the problem is not resolved, proceed to the next step.
9 Repeat step 2, step 3, and step 4.
10 Insert a different USB key that you know works properly.
11 Replace the processor airflow shroud (see "Installing the Processor Airflow
Shroud" on page 72).
12 Close the system (see "Installing the System Cover" on page 67).
13 Reconnect the system to the electrical outlet, and turn on the system and
attached peripherals.
If the problem is not resolved, see "Getting Help" on page 175.

Troubleshooting a Diskette Drive

Problem
• Error message indicates a diskette drive problem.
Action
CAUTION:
Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered
by your warranty. Read and follow the safety instructions that came with the
product.
1 Enter the System Setup program and verify that the diskette drive is
configured correctly (see "Entering the System Setup Program" on
page 41).
2 Run the appropriate online diagnostic test (see "Using Dell PowerEdge
Diagnostics" on page 163).
3 Turn off the system and attached peripherals, and disconnect the system
from the electrical outlet.
4 Open the system (see "System Cover" on page 66).
5 Remove the processor airflow shroud (see "Removing the Processor Airflow
Shroud" on page 70).
Troubleshooting Your System
149