Mec Micro26-XD Operator's Manual page 7

Section 2 - Safety
Safety Alert Symbols & Fall Protection
MEC manuals and decals use symbols, colors and signal words to help you recognize important
safety, operation and maintenance information.
ART_6091
DANGER
ART_6091
WARNING
ART_6091
CAUTION
ART_6091
CAUTION
ART_6091
NOTICE
Fall Protection
Operators must comply with employer, job site and governmental rules
regarding the use of personal protective equipment.
If required by your employer or job site, use personal fall protection
equipment (PFPE) when operating this machine.
All personal fall protection equipment (PFPE) must comply with applicable governmental regulations,
and must be inspected and used in accordance with the personal fall protection equipment (PFPE)
manufacturer's instructions.
Fall restraint or fall arrest must be properly attached to a designated anchorage point when driving or
operating the machine. Attach only one fall restraint or fall arrest to each anchorage point.
Page 3
RED and the word DANGER – Indicates an imminently hazardous
situation which, if not avoided, will result in death or serious injury.
ORANGE and the word WARNING – Indicates a potentially hazardous
situation which, if not avoided, could result in death or serious injury.
YELLOW with alert symbol and the word CAUTION – Indicates a
potentially hazardous situation which, if not avoided, may result in minor
or moderate injury.
YELLOW without alert symbol and the word CAUTION – Indicates a
potentially hazardous situation which, if not avoided, may result in
property damage.
GREEN and the word NOTICE – Indicates operation or maintenance
information.
Micro26 - XD - Operator's Manual - 96493
October 2024
ART_4713