Download Print this page

Mec Micro26-XD Operator's Manual page 6

Advertisement

Section 2 - Safety
DO NOT operate this machine until you have read and understood this manual, have
performed the Workplace Inspection, Pre-Start Inspection and Routine Maintenance, and have
completed all the test operations detailed in the Operating Instructions section.
Failure to read, understand and follow all safety rules, warnings, and instructions could result in
serious injury or death. For your safety and the safety of those around you, you must operate your
machine as instructed in this manual.
MEC designs aerial work platforms to safely and reliably position personnel, along with their
necessary tools and materials, at overhead work locations. The owner/user/operator of the machine
should not accept responsibility for the operation of the machine unless properly trained.
ANSI and other applicable standards identify requirements of all parties who may be involved with
self-propelled elevating work platforms. The Manual of Responsibilities is considered a part of this
machine and can be found in the manual compartment, located at the platform control station. To
ensure safe use of machine, inspections and training specified in ANSI/SIA A92.22 & A92.24 must be
performed at designated intervals as prescribed.
ART_6091
WARNING
Page 2
This product can expose you to chemicals known to the State of
California to cause cancer and birth defects or other reproductive harm.
For more information go to www.p65warnings.ca.gov.
Micro26 - XD - Operator's Manual - 96493
Safety
Safety
October 2024

Advertisement

loading
Need help?

Need help?

Do you have a question about the Micro26-XD and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel