Mec Micro26-XD Operator's Manual page 30

Section 8 - Operating Instructions and Function Tests
of wood is level.
While holding the piece of wood level, measure the distance from the bottom of the piece of wood to
the ground.
Divide the tape measure distance (rise) by the length of the piece of wood (run) and multiply by 100.
Example:
• Run = 12 feet / 3.6 meters
• Rise = 12 inches / 0.3 meters
• 12 inches ÷ 12 feet = 0.083 × 100 = 8.3%
• 0.3 meters ÷ 3.6 meters = 0.083 × 100 = 8.3%
If the slope exceeds the maximum slope or side slope rating, the machine must be winched or
transported up or down the slope. See Transport and Lifting section.
Operation from Ground with Controller
ART_6091
WARNING
Maintain safe distances between operator, machine and fixed objects.
Be aware of the direction the machine will travel when using the controller.
Battery Level Indicator
Use the LED diagnostic readout to determine the battery level.
Page 26
Use extreme caution when operating the machine with the controller
from the ground.
Micro26 - XD - Operator's Manual - 96493
RUN
RISE
ART_4983
October 2024
FULL LOW
ART_4984