SIGNIFY Gardco Form Ten Series Installation Manual page 37

REQUIRED TOOLS: 9/16" SOCKET/OPEN-END WRENCH & #2 PHILLIPS-HEAD SCREWDRIVER
STEP 5: REINSTALLING THE DOOR
Raise the door to the closed position and tighten the 2 no. 8-32
screws to 18 inch-pounds. When installation is complete, switch
the luminaire on to test the power cable connections
.
© 2022 Signify Holding. All rights reserved. The information provided herein is subject
to change, without notice. Signify does not give any representation or warranty as to
the accuracy or completeness of the information included herein and shall not be liable
2021
for any action in reliance thereon. The information presented in this document is not
intended as any commercial offer and does not form part of any quotation or contract,
unless otherwise agreed by Signify.
page 3
RETROFIT ARM MOUNT (RAM)
Signify North America Corporation
400 Crossing Blvd, Suite 600
Bridgewater, NJ 08807
Telephone 855-486-2216
All trademarks are owned by Signify Holding or their respective owners
443560819370 Rev C
Signify Canada Ltd.
281 Hillmount Road,
Markham, ON, Canada L6C 2S3
Telephone 800-668-9008