HMS Networks Anybus Wireless Bolt LTE AWB1504 User Manual page 38

® ™
Anybus Wireless Bolt LTE
6. Use Cases
6.1. Setting Up Bolt LTE with Automatic APN Assignment
Before You Begin
By default, the Bolt LTE APN Assignment is set to automatically search for the SIM card APN setting and assign it
to the Bolt LTE.
IMPORTANT
An APN automatically derived from SIM card identification may not give full access to the cellular
network. Follow your network operator's guidelines.
IMPORTANT
By default, Bolt LTE is set to automatically search for the SIM card APN setting.
If a general APN string is available for the network operator, it will be set as the APN Assignment.
Ensure that the general APN string is recommended by the network operator and in accordance with
the SIM card IoT data plan.
Procedure
In cases where no additional configuration of the settings in the Bolt LTE built-in web interface is required,
continue with this procedure.
When additional configuration is needed, see
(page 36).
Figure 27. Connect your device to internet
1. Insert a cellular SIM card in the Bolt LTE SIM card holder.
NOTE
Ensure that the SIM card contact surface is facing towards the Ethernet port.
Page 34 of 62
Configuration (page 13) and Set Up Bolt LTE as an Internet Router
SCM-1202-164 Version 1.5
Use Cases