Advertisement
Cellular Settings
APN Authentication
By default, APN Authentication is set to No. When enabled, PAP method is used.
NOTE
APN Authentication is to be configured only if your carrier has setup APN (Access Point Name) with
username and password.
Ensure that you have the APN username and password supplied by your carrier available.
Figure 16. Cellular Settings page, APN Authentication
To activate APN Authentication:
1.
Set the APN Authentication setting to Yes (PAP).
2.
In the User field, enter a username.
3.
In the Password field, enter a password.
4.
For the settings to take effect, click Save and Reboot.
The Bolt LTE reboots.
5.7.3. SIM PIN and PUK Settings
Navigate to the Cellular Settings page, SMS PIN and PUK.
SIM Card PIN Code
Figure 17. SIM card PIN code required
If the SIM card installed in the Bolt LTE is locked with a PIN code, enter it in the Enter PIN field.
SCM-1202-164 Version 1.5
®
™
Anybus
Wireless Bolt LTE
Page 23 of 62
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for HMS Networks Anybus Wireless Bolt LTE AWB1504
Related Products for HMS Networks Anybus Wireless Bolt LTE AWB1504
- HMS Networks AWB2030
- HMS Networks AWB2031
- HMS Networks Anybus Wireless Bridge II CAN AWB3006
- HMS Networks Anybus Wireless Bridge II CAN AWB3016
- HMS Networks Anybus Wireless Bridge II CAN AWB3016-B
- HMS Networks Anybus Wireless Bridge II Serial AWB3005
- HMS Networks Anybus Wireless Bridge II Serial AWB3015
- HMS Networks Anybus Wireless Bridge II Serial AWB3015-B
Need help?
Do you have a question about the Anybus Wireless Bolt LTE AWB1504 and is the answer not in the manual?
Questions and answers