Advertisement
®
™
Anybus
Wireless Bolt LTE
5.5. Factory Default Settings
Bolt LTE comes with the following factory default settings.
Table 3. Bolt LTE default settings
IP Assignment
IP Address
Subnet Mask
Default Gateway
Internal DHCP Server
Network Type
Incoming Traffic
You can restore factory default settings by making a Factory Reset. Refer to
(page 51)
and
Factory Reset Using the Built-In Web Interface (page
Page 18 of 62
Static
192.168.0.98
255.255.255.0
192.168.0.98
Enabled
Modem Preset List
Connects automatically to an available network according to priority order LTE, UMTS and GSM mobile
network.
NAT/Port Forward incoming traffic is Disabled.
Factory Reset Using the Reset Button
52).
SCM-1202-164 Version 1.5
Factory Default Settings
Advertisement
Related Manuals for HMS Networks Anybus Wireless Bolt LTE AWB1504
Related Products for HMS Networks Anybus Wireless Bolt LTE AWB1504
- HMS Networks AWB2030
- HMS Networks AWB2031
- HMS Networks Anybus Wireless Bridge II CAN AWB3006
- HMS Networks Anybus Wireless Bridge II CAN AWB3016
- HMS Networks Anybus Wireless Bridge II CAN AWB3016-B
- HMS Networks Anybus Wireless Bridge II Serial AWB3005
- HMS Networks Anybus Wireless Bridge II Serial AWB3015
- HMS Networks Anybus Wireless Bridge II Serial AWB3015-B
Need help?
Do you have a question about the Anybus Wireless Bolt LTE AWB1504 and is the answer not in the manual?
Questions and answers