HMS Networks Anybus Wireless Bolt LTE AWB1504 User Manual page 30

® ™
Anybus Wireless Bolt LTE
5.7.5. Enable SMS Communication
The Bolt LTE SMS application can receive, parse and respond to status information SMS.
By default, Handle incoming SMS is set to Externally via API.
Procedure
On the Cellular Settings page, SMS Settings:
Figure 21. SMS Settings
1. In the Handle incoming SMS menu, select Internally in Bolt LTE.
2. In the Access code field, enter an access code.
IMPORTANT
To prevent unauthorized access, the SMS must start with an access code. If no Access code is
defined, SMS parsing is disabled. The access code most consist of at least one character.
NOTE
The Access code set here must be included in each SMS sent from the Bolt LTE. See
SMS Messages to the Bolt LTE (page
3. In the Trusted numbers fields, enter Country code, National destination and the Subscribing number.
You can add three trusted phone numbers, from which the Bolt LTE will accept SMS.
NOTE
In the National destination code, omit the initial 0.
NOTE
Do not use spaces between the numbers.
Example 1. Trusted number format
Trusted number: +4635172900
• Country code: +46
• National destination code: 035
• Subscriber number: 172900
Page 26 of 62
27).
Cellular Settings
To Send
SCM-1202-164 Version 1.5