Download Print this page

BMW R1150RT - MAINTENANCE INTEGRAL ABS Maintenance Manual Page 3

Hide thumbs


BMW Motorrad
Maintenance schedule
R 1100 S EVO / R 1150 R / R 1150 RT
Order No.
Read the fault code memory with the BMW MoDiTeC
[Integral ABS] perform bleed test with BMW MoDiTeC
Change oil while at regular operating temperature and replace the oil filter element
If the motorcycle is ridden only for short distances or outside temperatures are below 0 °C: at the
latest every 3,000 km (1,800 miles)*
Change oil in gearbox while at operating temperature
every 2 years*
at the latest
Change oil in rear wheel drive while at operating temperature
if necessary, clean inductive sensor on rear wheel
every 40,000 km (24,000 miles) or at the latest every 2 years*
Replace fuel filter *
Normally every 40,000 km (24,000 miles), if fuel is of poor quality every 20,000 km (12,000 miles)
Check the battery fluid level, if necessary top up with distilled water
Clean and grease battery poles if necessary
Replace intake air filter element
In very dirty and dusty operating conditions, replace every 10,000 km (6,000 miles) or even more
frequently if necessary *
Replace Poly-V belt *
Replace the Poly-V belt every 60,000 km (36,000 miles); do not adjust it
Check brake fluid level at front and rear
Check operation of brake system and freedom from leaks; repair/replace items if necessary*
Examine brake pads and discs for wear, replace as necessary*
[Without ABS] change brake fluid every twelve months
[Integral ABS] change bake fluid in wheel circuit every 12 months
[Integral ABS] change brake fluid in control circuit every 2 years*
[Integral ABS] perform bleed test with BMW MoDiTeC
Check clutch fluid level
Change the clutch fluid*
every 2 years at the latest
Check tightness of rear wheel studs
Check rear wheel bearing play by tilting wheel
Check swinging arm bearings (freedom from play), adjust if necessary *
Grease the side stand pivot
Check function of side stand contact switch
Check condition of spark plugs
Replace spark plugs
Tighten cylinder head nuts
Check/adjust valve clearances
Check that the throttle cable moves freely and is free of kinks and chaffing, replace if necessary *
Check throttle-cable play
check synchronisation, repair leaks if necessary *
Final inspection with road safety and functional check:
Condition of tyres and wheels, tyre pressures
Lights and signalling equipment, telltale and warning lights, instruments,
clutch, gearshift mechanism, hand brake and foot brake, steering,
if necessary, test drive
Charged as an additional item
Order No. 01 71 0 029 614
Registration No.
Mechanic's signature
UX-VS-2, 12.2000
2 years
2 years
2 years
2 years
Printed in Germany


Table Of Contents

Comments to this Manuals

Symbols: 0
Latest comments:
  • GHGHGH Feb 04, 2015 09:08: