Sharp MultiSync ME982 User Manual page 72

nInstalling a safety wire

NOTE: • When installing, do not apply pressure to the LCD panel or excessive force to any part of the monitor by pushing or
leaning on it. This may cause the monitor to become distorted or damaged.
Handles for safety wire
Attach the safety wire to the handles shown in the figure below.
nAttaching Mounting Accessories
Be careful to avoid tipping the monitor when attaching accessories.
1. Attach eyebolts for mounting (ME982/ME862/ME752)
This model is equipped with pre-installed eyebolt brackets for attaching eyebolts (not included) to aid in mounting.
• Screw the eyebolts into eyebolt holes in eyebolt brackets as shown in the picture.
• Be sure the eyebolts are secure.
• Do not mount the monitor using only the eyebolts. Eyebolts are for temporary use only.
• This monitor is designed to be installed on a concrete wall or pillar. Reinforced work might be necessary for some
materials such as plaster / thin plastic board / wood before starting installation.
This monitor and bracket must be installed on a wall which can endure at least 4 times or more the weight of the monitor.
Install by the most suitable method for the material and the structure.
Safety wire (Landscape)
English−72
Safety wire (Portrait)
ME982/ME862/ME752
M10