Sharp MultiSync ME982 User Manual page 47

Operation
Access the following address to show HOME.
https://<the Monitor's IP address>/index.html
Click each link on the left-hand column below HOME.
REMOTE CONTROL
Enable an operation to control the monitor equivalent to the keys on the remote control.
nOSD Menu Settings in the Monitor Web controls
Select one of the links on the left side of the monitor web controls to configure the settings available in the monitor's OSD.
Please see page 58 for the full list of OSD menu controls.
[Picture], [Audio], [Input & Output], [Schedule], [Network], [Protect], [Setup], [System]
TIP:
• The buttons in the monitor web controls function as follows:

[APPLY] ........ Saves the settings.

[CANCEL] .... Returns to the previous settings.
TIP: • CANCEL is disabled after clicking APPLY.

[RELOAD] .... Reloads the settings.

[RESET] ....... Resets to the initial settings.
nSNMP Settings
Click on "SNMP" on the left-hand column below HOME.
The SNMP protocol is used to get status information and to control a monitor directly via the network.
Version:
SNMP v1 Authenticated plaintext by community name, does not return a confirmation message of the trap.
SNMP v2c Authenticated plaintext by community name, returns a confirmation message of the trap.
SNMP v3 User authentication and message encryption are performed using an authentication protocol.
English−47