Sharp MultiSync ME982 User Manual page 58

Appendix-B
Default values can be provided on request.
Picture
Picture
Picture mode
Native
Retail
Conferencing
Highbright
Transportation
Custom
Backlight
Backlight Dimming* *
1, 3
Video Black Level*
1
Gamma*
2
Native
2.2
2.4
S Gamma
Dicom Sim.
Programmable
Color
Color* *
1, 3
Color Temperature
Color Control* *
1, 3
Contrast
Common Settings Menu List
Provides pre-configured picture settings suitable for various environments where this device may be used,
or customize settings to viewer preference.

TIP: • Changing any of the settings of the [Picture mode] in the OSD menu will change the settings for
the current input only.
Standard setting.
Bright, vivid colors ideal for advertising and branding.
Lower color temperature and optimized for natural human complexions.
Maximum backlight brightness with higher color temperature for brighter ambient environments.
Maximum backlight brightness with high contrast to read text under all conditions.
Customizable settings.
Adjusts the overall image and background brightness. Press [+] or [–] to adjust.

TIP: • When [On] is selected in [Ambient Light Sensing] at [Advanced], this function cannot be
changed.
Dynamically adjusts the backlight of the LCD dependent on the input signal that is being displayed.
Adjusts the black luminance.
Select a monitor gamma correction for best picture quality. Selection depends on the desired usage.
Gamma correction is handled by the LCD panel.
Typical monitor gamma for use with a computer.
Typical gamma settings for use with videos, such as DVDs and Blu-rays.
Special gamma for certain types of movies. Raises the light parts and lowers the dark parts of the image
(S-Curve).
DICOM GSDF curve simulated for LCD type.
NOTE:
• Do not use for diagnostic purposes.
A programmable gamma curve can be loaded using optional software.
Adjusts the color saturation of the screen. Press + or – button to adjust.
Adjusts the color temperature of the entire screen. A low color temperature will result in a reddish screen.
A high color temperature will make the screen bluish. If a temperature needs further adjustment, the
individual R/G/B/ levels of the white point can be adjusted. To adjust the R/G/B levels, set [Custom] as
[Color Temperature] selection.
MaxValue corresponds to the panel's native white point and the OSD shows [Native].
TIP:
• When [Programmable] is selected in [Gamma], this function should be fixed to [Native].

• This function may not work depending on the application or MediaPlayer contents.
Adjusts the hue of the Red, Yellow, Green, Cyan, Blue, and Magenta colors individually. For example, you
can change red to yellow or magenta.
Adjusts the image brightness in relationship to the input signal. Press + or – button to adjust.
English−58