Sharp MultiSync ME982 User Manual page 69

System
System
Date & Time
Date & Time
Use 24-Hour Format
Automatic Date & Time
Set date
Set time
Date format
Time Zone
Language & Keyboard
Language
Virtual Keyboard
Physical Keyboard
OSD
OSD Time
Information OSD
Communication Information
Screen Rotation
Landscape
Portrait
180°Rotate
Logo Screen
Startup Animation
Wallpaper
Storage Space
Update Firmware
Current Version
Update

TIP: • When a period of about two weeks has passed after disconnecting the power cord of the
monitor, the time will be initialized and the clock function will stop. If the clock function has
stopped, configure the [Date & Time] again.
Sets whether or not to display the time in the 24-hour format.
Sets whether or not to set the data & time automatically via network.
Sets the date. Shown when [Automatic Date & Time] is set to off.
Sets the time. Shown when [Automatic Date & Time] is set to off.
Sets the display format for the date.
Sets the time zone.
Sets the display language for the screen.
Selects the keyboard to display on the screen.
Shows information about the physical keyboard used.
Sets whether or not to display a keyboard on the screen when a physical keyboard is connected.
Turns off the OSD after a period of inactivity. The preset choices are 10-240 seconds.
Selects whether or not to automatically show information about the monitor when it powers on, changes
input, or the current input signal changes.
The information includes the current input, audio source, aspect ratio, resolution, and refresh rate. The
monitor's ID and IP address are also shown unless their setting is OFF.
Note that the information OSD is also displayed when pressing the DISPLAY button on the remote control.
The remote control function cannot be turned off.
Selects whether or not to show the [IP Address] when the [Information OSD] is [On].
The information is set in [Ethernet] at [Network].
Changes the OSD menu and image orientation. The OSD menu and image rotate direction are
synchronized and will show in the same orientation.

TIP: • The HDMI/USB-C terminal does not support automatically rotating images to a portrait
orientation. Only the OSD menu rotates when [Portrait] is set.

• When you change the [Screen rotation] setting, the home screen appears momentarily and then
automatically return to the input signal you set.
Shows the image in landscape orientation.
Shows the image in portrait orientation.
Shows the image in upside down.
Sets whether or not to display the logo screen when turning the power on.
Sets whether or not to display the animation when turning the power on.
Sets the background of the home screen.
Displays the capacity of the internal storage of this monitor and the external storage connected to this
monitor.
Confirms the firmware version and updates the firmware.
TIP:
• After updating the firmware to the latest version, it cannot be restored to a previous version.
Displays the current firmware version.
Updates the monitor firmware from a connected USB drive containing a firmware file. Press "Check" to
initiate the update.
TIP:
• Any applicable firmware versions for your monitor are available for download from our websites
(see page 56). The firmware download file set includes instructions for updating the firmware
via USB. When updating the FW via USB, connect the USB drive to the USB1 or USB2 port on
the monitor (see page 16).
English−69