Sharp MultiSync ME982 User Manual page 17

7
HDMI 1/2/3 input terminal (HDMI1 (ARC)/HDMI2/
HDMI3)
HDMI signals input.
Please use an HDMI cable with the HDMI logo.
When input signal is 4K, please use high-speed HDMI
cable.
HDMI1(ARC):
Also supports ARC (Audio Return Channel) for audio
output.
ARC sends the monitor's sound to audio equipment with
an HDMI1 ARC connector.

TIP: • Use the included ARC-supported HDMI cable. The
audio equipment will output the monitor's audio.
The audio equipment can be controlled with the
included remote control.

• Some HDMI cables and devices may not
show an image correctly due to different HDMI
specifications.

• This monitor supports HDCP (High-bandwidth
Digital Contents Protection) coding. HDCP is a
system for preventing illegal copying of video
data sent over a digital signal. If you are unable
to view material via the digital inputs, this does
not necessarily mean that the monitor is not
functioning properly.

• Compatible signal list is on the
To maintain compliance with EMC regulations, use shielded cables to connect to the following terminals: USB port, USB
Type C port and Audio output terminal. Use shielded cables with ferrite core to connect to the following terminals: HDMI input
terminal, RS-232C input terminal.

TIP: • Do not connect or disconnect cables when turning on the monitor's main power or other external equipment's power
as this may result in loss of image.

• Do not use an attenuating (built-in resistor) audio cable. Using an audio cable with a built-in resistor will lower the
sound level.
Before making connections:
• Turn off the device's power before connecting it to the monitor.
• Refer to the device's user manual for available connection types and instructions for the device.
• We recommend turning off the monitor's main power before connecting or disconnecting a USB flash drive to avoid data
corruption.
• Check the USB flash drive for viruses as necessary.
page 53.
English−17
8
USB Type-C port (power supply 5 V/3 A)
Check the shape of the connectors when connecting a USB
cable. When supplying power via the USB Type-C port, use
a USB cable supporting 3 A.
You can connect a device that supports DisplayPort
alternate mode. In order to supply power to connected
devices, it is necessary to support the Power delivery
standard.
NOTE:
• Do not tie the USB cable. Otherwise, it may
cause overheating or fire.
TIP:
• The Power Delivery function is not guaranteed to
work with all devices. Please check the connected
device's user manual and specifications for its
power capabilities and requirements.