Sharp MultiSync ME982 User Manual page 76

Manufacturer's Recycling and
We are strongly committed to environmental protection and sees recycling as one of the company's top priorities in trying to
minimize the burden placed on the environment. We are engaged in developing environmentally friendly products, and always
strive to help define and comply with the latest independent standards from agencies such as ISO (International Organization for
Standardization) and TCO (Swedish Trades Union).
Energy Saving
This monitor features an advanced energy saving capability. When a Display Power Management signal is sent to the monitor,
the Energy Saving mode is activated. The monitor enters a single Energy Saving mode.
For additional information visit:
https://www.sharpusa.com/ (in USA)
https://www.sharpnecdisplays.eu (in Europe)
https://www.sharp-nec-displays.com/global/index.html (Global)
Addition explanation to EcoDesign Regulation
The following setting conforms to the "Normal Configuration" as defined in the "EcoDesign Regulation (2019/2021)" and is the
recommended setting.
• [Power Save] is enabled
• [Mode] is set to [Low Power]
• [USB-Power] is set to [Auto]
• [Power Save Message] is enabled
• [Quick Start] is set to [Off]
• [Human Sensing] is set to [Disable]
If you change some of these setting the power consumption can be higher than using the recommended setting.
Due to the various possibilities to save energy, the different power modes named as "standby state".
"Standby state" mean "standby mode" or "network standby mode" if the recommended setting are used.
The monitor enter into "standby mode" if you use the recommended setting and haven't connected a LAN network. Using the
recommended setting and a active LAN connection "standby state" means "network standby mode".
Energy Information
English−76