Sharp MultiSync ME982 User Manual page 40

nLocking the IR Remote Buttons
Locking
The [IR] option in the [Lock Settings] prevent the monitor from being controlled using the remote control. Enabling [IR] does not
lock the buttons on the monitor control panel.
1. Using the remote control, navigate to [Protect] then to [Lock Settings].
2. Under the [Select] option, press the ,  buttons to change the setting to [IR].
3. Under [Mode] choose the lock mode you want to enable.
• [Unlock] ............................ All buttons are unlocked.
• [All Lock] .......................... All buttons are locked.
• [Custom Lock] ................. All remote buttons are locked except for the following buttons that can be individually set as
• [Power] ....................... Select [Unlocked] to be able to use the ⏻ button when the IR Remote is locked.
• [Volume] ..................... Select [Unlocked] to be able to control the volume with the VOL+, VOL– buttons when the IR
• [Min Volume] and
[Max Volume] ........ The volume buttons are unlocked, and the volume level can only be adjusted within the [Min]

TIP: • Volume [Min Volume]/[Max Volume] lock only works with Internal speaker, Speaker Out connector and
Audio Line Out (3.5 mm connector). It does not work when [Audio Receiver] is enabled.
• [Input] ......................... Select [Unlocked] to unlock all input buttons. Select [Locked] to lock all input buttons.
4. Select [Activate] to activate all settings.
Unlocking
• IR Remote Control – to return to normal operation, press-and-hold the DISPLAY button for at least 5 seconds.
locked or unlocked.
Select [Locked] to lock the button.
Remote is locked. Select [Locked] to prevent volume adjustment.
and [Max] range set.
The [Volume] must be set to [Unlocked] for this setting to operate.
English−40