Sharp MultiSync ME982 User Manual page 24

nSetting the Aspect Ratio
Press the ASPECT button on the remote control to cycle through the options available for the current input signal.
➙ ➙
[Normal] [Full] [Wide]
Aspect ratio of
Unchanged view*
image
4:3
Squeeze
Letterbox
* : Gray areas indicate unused portions of the screen.
3
[1:1]: Shows the image in a 1 by 1 pixel format.
[Zoom]: The zoom function increases the image size, which expands the image beyond the active screen area. The parts of the
image outside the active screen area are not shown.
➙ ➙
[1:1] [Zoom]
Recommended selection for picture
3
[Normal]
[Full]
[Wide]
ZOOM
aspect*
3
Reproduces the aspect ratio that is sent from
the source.
Fills the entire screen.
Expands a 16:9 letter box signal to fill the entire
screen.
ZOOM
English−24
Description