Sharp MultiSync ME982 User Manual page 49

Commands
Connecting the monitor with RS-232C or connecting to a network via LAN, the control commands transmit and receive between
the monitor and a connected device. It allows for remote control of the monitor from a connected device.
Instructions for both control command types can be found in the external documents.
For details of each command, see the manual on the following website.
https://www.sharp-nec-displays.com/global/index.html
Proof of Play
This function allows sending of messages for the current status of the monitor by self-diagnosis.
For the Proof of Play function including self-diagnosis, please see the "External_Control.pdf". See
Check item
INPUT
a
Resolution
b
Picture Image
c
AUDIO OUT
d
TIME
e
EXPANSION DATA
f
Example:
HDMI1
a
3840 x 2160
b
Normal Picture
c
Normal Audio
d
2020/1/1/0h/0m/0s
e
10h: MEDIA PLAYER is stop
f
HDMI1, HDMI2, HDMI3, USB-C, HOME
e.g. (H)1920, (V)1080, (H)3840, (V)2160 or No signal or Invalid signal
Normal Picture or No Picture
Normal Audio or No Audio
(year)/(month)/(day)/(hour)/(minutes)/(second)
01h: AC Power On
02h: DC Power On
03h: DC Power Off
10h: MEDIA PLAYER is stop
11h: MEDIA PLAYER is start
12h: MEDIA PLAYER is pause
13h: MEDIA PLAYER error occur
40h: Human detected (Human sensor Status)
41h: Human detect cleared (Human Sensor Status)
Message
English−49
page 56.