Set Mode; Using The Set Mode; D Set Mode Items - Icom IC-M25 Instruction Manual

■ Using the Set mode

You can set seldom changed settings in the Set mode.
You can customize the transceiver settings to suit your preference and operating style.
1. Turn OFF the transceiver.
2. While holding down [VOL/SQL], turn ON the transceiver to enter the Set mode.
• The " " item is displayed.
3. Push [VOL/SQL], or push [▲] or [▼] while holding down [VOL/SQL] to select an item.
4. Push [▲] or [▼] to select an option.
5. Push [16/C] to exit the Set mode.

D Set mode items

• Beep
• Scan Timer*
2
• SQL Key Action
• Power Save
• Float'n Flash Power Save
• Charging Time Warning
* For the USA, EXP, and AUS transceiver versions *
1
* The "CH Display" item is displayed for each selectable channel group.
3
• WX Alert*
1
• Auto Scan*
2
• Backlight
• Float'n Flash
• Automatic AquaQuake
• ECO TX Power

SET MODE

• Scan Type*
2
• Dual/Tri-watch*
• Contrast
• Float'n Flash Alarm
• CH Display*
3
Except the NLD version
2
8
1 1
2 2
3 3
4 4
5 5
6 6
7 7
8 8
9 9
2
10 10
11 11
12 12
13 13
14 14
15 15
16 16
17 17
18 18
16