Icom IC-M25 Instruction Manual page 24

7
DUALWATCH AND TRI-WATCH
(Except the NLD version)
■ Description
Dualwatch and Tri-watch are convenient to periodically check Channel 16 while you are
operating on another channel.
Dualwatch:
Operating
channel
Periodically checks Channel
16 while operating on another
channel.
When a signal is received:
On Channel 16:
On the Call channel: Tri-watch switches to Dualwatch until the signal on the Call channel
■ Operation
1. Select Dualwatch or Tri-watch in the Set mode. (p. 17)
2. Push [▲] or [▼] to select a channel.
3. Hold down [DUAL] for 1 second to start Dualwatch or
Tri-watch.
• During Dualwatch, "DUAL" blinks.
• During Tri-watch, "TRI" blinks.
• When a signal is received on the Channel 16, 2 beeps
sound and " " blinks.
• When a signal is received on the Call channel, "CALL" is
displayed.
4. Push [DUAL] again to cancel Dualwatch or Tri-watch.
15
CH 16
Dualwatch/Tri-watch pauses on Channel 16 until the signal
disappears.
disappears.
Tri-watch:
Operating
channel
Periodically checks Channel 16 and
the Call channel while operating on
another channel.
Example: Dualwatch
Call
channel
CH 16