HPE Apollo 4200 Gen10 Plus User Manual page 73

9. Connect the power cable to the OCP fan board.
10. Install the PCIe riser cage ( Drive cage options).
11. Install the air baffle .
12. Install the access panel .
13. Install the server into the rack .
14. Power up the server.
Storage controller options Storage controller options
This server supports the following controllers:
Embedded controllers
The embedded controller is enabled through UEFI System Utilities and configured using either System Utilities or the HPE Smart
Storage Administrator (Intelligent Provisioning).
For more information, see Set up the server .
HPE Apollo 4200 Gen10 Plus Server User Guide 73