HPE Apollo 4200 Gen10 Plus User Manual page 89

9. Install the terminal block connector into the power supply.
10. Secure the power cord, wires, and/or cables in the strain relief strap attached to the power supply handle:
a. Unwrap the strain relief strap from the power supply handle.
CAUTION: CAUTION: Avoid tight bend radii to prevent damaging the internal wires of a power cord or a
server cable. Never bend power cords and server cables tight enough to cause a crease in the
sheathing.
b. Secure the power cord, wires, and cables with the strain relief strap. Roll the extra length of the strap around the power supply
handle.
HPE Apollo 4200 Gen10 Plus Server User Guide 89