Product Quickspecs - HPE Apollo 4200 Gen10 Plus User Manual

Drive options Drive options
Drive cage options Drive cage options
Riser and riser cage options Riser and riser cage options
Expansion slots Expansion slots
Storage controller options Storage controller options
Memory options Memory options
Installing an OCP NIC 3.0 adapter Installing an OCP NIC 3.0 adapter
Internal USB device option Internal USB device option
Power supply option Power supply option
HPE Smart Storage Battery HPE Smart Storage Battery

Product QuickSpecs

Product QuickSpecs
For more information about product features, specifications, options, configurations, and compatibility, see the product QuickSpecs on the
Hewlett Packard Enterprise website (https://www.hpe.com/info/qs
Introduction Introduction
Install any hardware options before initializing the server. For options installation information, see the option documentation. For server-
specific information, use the procedures in this section.
If multiple options are being installed, read the installation instructions for all the hardware options to identify similar steps and streamline
the installation process.
WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the internal WARNING:
system components to cool before touching them.
CAUTION: To prevent damage to electrical components, properly ground the server before beginning any CAUTION:
installation procedure. Improper grounding can cause electrostatic discharge.
Installing the security bezel Installing the security bezel
The security bezel helps prevent unauthorized physical access to the front panel components. Install the security bezel and then lock it with
the key provided with the kit.
https://www.hpe.com/info/qs).
HPE Apollo 4200 Gen10 Plus Server User Guide 52