Memory Modules - NEC VERSA SXI Manual

Memory Modules

Your NEC Versa computer comes standard with 64 or 128 megabytes (MB) of random
access memory (RAM). You can increase system memory to a maximum of 512 MB,
depending on your model. The RAM combinations vary depending on which two of the
listed single bank SO-DIMMs are used.
64-MB memory module
!
128-MB memory module
!
256-MB memory module
!
to ensure proper functionality of your NEC Versa notebook computer.
Contact your NECC dealer for information about available NECC-supplied/approved
memory modules.
electricity from yourself and your clothing by touching a nearby metal surface.
Follow these steps to install a memory module.
1. Power off the NEC Versa and disconnect any peripheral devices.
Turn over the system and locate the memory module bay.
2.
Remove the screw and bay cover.
3.
Locate the connectors and alignment key on the SO-DIMM.
4.
5. Locate the SO-DIMM expansion port and proceed as follows:
5-14 Using the System Drives and Bays
Only install NECC supplied/approved memory module options
Before handling any internal components, discharge static