System Care; Precautions For System Use - NEC VERSA SXI Manual

System Care

The NEC Versa is a durable, dependable system built for extensive use and travel.
Follow these guidelines to maintain the condition and performance of your computer.
following conditions:
! The power cord is damaged or frayed.
Liquid spills on or into the NEC Versa.
!
! Someone drops the system or damages the casing.

Precautions for System Use

Follow these precautions when using your NEC Versa SXi computer, AC adapter, and
VersaBay III.
Avoid dropping or bumping the computer or the AC adapter.
!
Do not stack heavy objects on the computer, the AC adapter, or the battery packs.
!
Avoid moving the NEC Versa during system operation, especially while the hard
!
disk or VersaBay III device is being accessed.
When using the AC adapter, make sure the power source falls within the system's
!
compatible range of 100-240 volts AC. Never use the AC adapter if the voltage falls
outside of this range. (Watch for this when traveling to other countries.)
Turn computer power off before attaching or removing non-plug and play devices.
!
Do not push any foreign objects into the NEC Versa bays, connectors, and slots.
!
Do not set the computer on top of a magnetized area. Doing so can destroy the data
!
on your hard disk drive. (Some airline tray tables are magnetic.)
Avoid using the computer or AC adapter for extended periods in direct sunlight.
!
Do not use the system in humid or dusty environments.
!
Turn computer power off before cleaning it.
!
Avoid exposing the NEC Versa or AC adapter to extreme changes in temperature or
!
humidity. If it is unavoidable, allow your NEC Versa to adjust to room temperature
before use.
When cleaning the system, use a soft, clean, dry cloth. Avoid wiping the display
!
surface with abrasive material, including rough fabric. Do not use a cleaning
solution; this may damage the notebook's plastic.
If the AC adapter becomes extremely hot, unplug the adapter and let it cool.
!
Keep the AC adapter away from the IR ports.
!
2-12 Getting Started
Immediately turn off and unplug the NEC Versa under the