NEC VERSA SXI Manual page 114

External Keyboard/Mouse
You can add a full-size PS/2-style keyboard or PS/2-style mouse to your NEC Versa
using the Plug and Play feature. The PS/2 style keyboard and the PS/2 style mouse are
warm insertable allowing you to connect the devices while the NEC Versa is powered
on. You can continue to use the system keyboard and VersaGlide touchpad while an
external keyboard or mouse is connected.
Note
connected, see Chapter 3, "Using the BIOS Setup Utility." The Internal Mouse
parameter in the Advanced CMOS Setup section of the BIOS Setup parameters allows
you to enable or disable the VersaGlide touchpad.
To attach both an external keyboard and a external mouse at the same time, use the
optional NEC Y-adapter. For ordering information, contact your NECC dealer.
Note
NECC office or their dealers for ordering information.
To connect an external keyboard or mouse simply put the system into a sleep state,
connect the device to the keyboard/mouse port, then resume the system when the
connection is secure. You are now ready to use your external keyboard or mouse.
External Audio Options
The NEC Versa comes equipped with built-in audio ports that let you play sound.
Connect audio jacks, like a microphone, headphones, or external speakers to the audio
ports as follows. The headphone/external speaker port supports SP/DIF.
Locate the audio port that you want to use.
1.
2. Plug the jack into the appropriate port on the left side of the NEC Versa.
Note
sound distortion or feedback, lower the volume.
Some feedback is caused by having the microphone and speakers too close to each
other, so moving the external audio option away from the unit may also help.
8-4 Using External Devices
For information about disabling the VersaGlide while an external mouse is
If you purchased this product outside the U.S. or Canada, contact the local
If you are using external speakers or an external microphone and experience