NEC VERSA SXI Manual page 81

4. In the NEC Product Recovery utility screen, use the VersaGlide touchpad to
choose Partition Only to restore drive C: of a multiple partitioned drive to its
original factory installed state.
applications installed on your system.
If the hard disk is configured with multiple or extended partitions you may have to
reinstall some software to restore configuration settings and shared files.
Read the Warning screen.
5.
A warning displays indicating that drive C: (the primary drive/partition) is about to
be erased and formatted. It may be necessary to reinstall software to the other
drives (partitions) to reestablish Start Menu links and other configuration
requirements stored on drive C:.
Select Continue to proceed to perform a Partition Only restore.
6.
If you select Back, the recovery utility returns to the prior screen which has an exit
option.
If you select Continue, a screen with progress bars displays and lets you know the
progress of the recovery.
process.
7. When the recovery process is complete, you are prompted to remove the CD from
the CD-ROM drive and reboot your system.
8. Press Enter , click Reboot, or press
A series of hardware detection screens display, the system reboots, and the
Windows Setup screen appears. Follow the on-screen instructions to set up
Windows.
You are required to reenter your Microsoft license number.
Choose your restore option carefully to prevent losing data and
Do not turn off or disturb the system during the recovery
Alt-R
Using the Operating System and Utilities 4-15
to reboot your system.